Platform Features
From first call to final invoice — RevoField covers every step of the job lifecycle in one unified platform built for trade professionals.
Explore all featuresPrice pressure washing, painting, sealing, and any area-based job in seconds. Enter the square footage directly or as length × width, pick a surface preset for your price per square foot, set a minimum, and get the job price instantly. No signup. See our pressure washing tools for more.
Area × rate, or your minimum — whichever is higher.
No credit card required • Cancel anytime
The math is deliberately simple, which is exactly why it's so useful on-site. The calculator uses:
area = square feet (or length × width)
job price = max( area × price_per_sqft , minimum )
Area is the surface you're treating. Measure it directly if you know it, or type a length and width and the tool multiplies them for you — handy for rectangular driveways, decks, and walls.
Price per square foot is your rate. The preset buttons drop in typical rates by surface, but you should always override them with a number that reflects your local labor, chemicals, equipment, and target margin. A soft wash uses more chemical than a concrete blast, so it earns a higher rate.
The minimum job price is the floor. Small jobs still cost you drive time, setup, and teardown, so the calculator charges the higher of (area × rate) or your minimum. Pricing by area keeps your quotes consistent and defensible; a good field quoting and estimates workflow turns that number into a professional quote you can send before you leave the driveway.
Typical US ranges as of 2026 — verify locally. These are starting points, not gospel; adjust for your costs, difficulty, and market.
| Surface / Job type | Preset rate | Typical range |
|---|---|---|
| Driveway / concrete (pressure wash) | $0.20/sq ft | $0.15–$0.35 |
| House soft wash | $0.30/sq ft | $0.25–$0.45 |
| Deck / patio | $0.35/sq ft | $0.30–$0.50 |
| Interior painting | $2.00/sq ft | $1.50–$3.00 |
| Exterior painting | $1.50/sq ft | $1.00–$2.50 |
Across all surfaces, pressure washing averages roughly $0.42–$0.52/sq ft and a typical residential job runs about $250–$450. For deeper guidance, see the pressure washing overview and grab the free pressure washing estimate template.
Say a customer wants a two-car concrete driveway pressure washed. You measure it at 30 ft × 20 ft = 600 sq ft. You price concrete at $0.25/sq ft (a touch above the $0.20 preset because it's heavily stained). Your minimum is $100.
600 sq ft × $0.25 = $150.00
max( $150.00 , $100.00 ) = $150.00
The $150 clears the $100 minimum, so you quote $150. If instead it were a small 300 sq ft patio at the same rate, area × rate would be only $75 — below your floor — so the $100 minimum would apply and protect your margin. Type these numbers into the calculator above to see it work.
Measure, don't eyeball. A wheel or laser measure pays for itself. Round up slightly rather than down — you rarely regret a little cushion, and underquoting eats your day.
Set the rate by surface, not by habit. A soft wash, a rough deck, and a smooth concrete pad are three different jobs. Use the presets as a start, then adjust for stains, height, access, and chemical use.
Always keep a minimum. Drive time and setup don't scale down. A minimum of $100–$150 keeps small jobs from quietly losing money.
Bundle the quote fast. The best time to close is on-site. See how to quote and estimate faster, or try the quote & estimate calculator to layer materials and markup on top of this square-foot base. Browse all free tools for more.
Do the math here, then let RevoField turn it into a branded quote your customer can approve from their phone — and invoice the moment the job's done. Works offline, right in the driveway.
Free 30-day trial. No credit card required. Works offline.